|
|
|
|
|
|
|
|
Water Technologies > Industries > Hydrocarbon Processing > Services
|
 |
Hydrocarbon Processing - Services Case Studies
|
 |
|
 |
Our team of experts has helped dozens of customers with water and wastewater treatment issues. Following are just a few examples. Contact us at petroleum.water@siemens.com for more information or to discuss your application.
Refinery, Australia
-
Identified flow reductions of 40 percent, resulting in lower capital expenditures for new WWTP -
Bench study nitrification/denitrification kinetics -
Pilot test liquid/liquid hydrocyclone on desalter water for oil/water separation -
Hydrocarbon loss control Refinery, Louisiana, United States - Benzene NESHAP (National Elimination Standards for Hazardous Air Pollutants) compliance, identified benzene reductions of approximately 90 percent
- Developed RCRA (Resources Conservation and Recovery Act) impoundment closure plans
Plastics Company - Determined acrylonitrile and Styrene balance (losses) for SARA (Super Fund Amendments and Reauthorization Act) reporting – 88 percent and 39 percent reduction of calculated losses – minimized VOC (volatile organic compounds) emissions
- Source stream control, recycle and reuse of intermediate wastewater streams
- Determined plant effluent to be 25 percent less than historical value reported to EPA for five to seven years, leading to lower capital expenditures for filtration plant
Refinery, Ohio, United States - Source control leading to benzene reductions and compliance at aeration basin of < 0.5 ppm
- Source control of coke fines to minimize hazardous wastes generation
- Developed water recycle and reuse options leading to more than 750 gpm wastewater reduction through source stream reuse
- WWTP performance evaluation and optimization
Chemical Plant, Belgium - Existing WWTP near capacity, identified organic load reductions of approximately 45 percent, primarily MeOH
E&P Facilities, Major Alaskan and South American Oilfields - Pilot test of desanding hydrocyclones at wellheads
- Developed recycle and reuse of sanitary effluent for process uses
- Developed methods for the treatment and disposal of drill fluids and cutting
- Developed zero discharge of liquids at remote exploration and production sites
Contact us to find out how we can save you money.
E-mail us today at petroleum.water@siemens.com
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|