We offer solutions throughout the entire metal finishing process.  You can view our Metal Finishing Technology Map to see where our products and services fit into each of these process areas.

Incoming Plant Water
Based on incoming water quality, one or a combination of several of these technologies can be used to produce the desired water quality.
 Carbon filters
 Chemical feed and control
 Media filtration
 Softening, hot or cold lime
 Softening, ion exchange
 Reverse osmosis

Clean / Electroclean
 Silverback® aqueous cleaner recovery system

Acid Clean or Passivate
 Ion exchange
 Electrocatalytic recovery

Pre-Plate / Pre-Paint Rinses
 Ion exchange (on-site or off-site regeneration)
 Memtek® microfiltration
 Reverse osmosis

Activation
 Off-site treatment
 Electrocatalytic recovery

Plating Processes
 Batch treatment systems
 Ion exchange
 J-Press® filter press
 Optima™ insoluble anodes
 Electrocatalytic recovery

Pre-Paint Processes
 Ion exchange (on-site or off-site regeneration)
 J-Press® filter press

Post-Plating Dragout
 J-Press® filter press
 Electrocatalytic recovery

Post-Plate / Post-Paint Rinses
 Ion exchange (on-site or off-site regeneration)
 Memtek® microfiltration
 Reverse osmosis
 Electrocatalytic recovery

Wastewater Treatment
 Batch precipitation system
 Ion exchange (on-site or off-site regeneration)
 J-Press® filter press
 J-Mate® sludge dryer
 Memtek® microfiltration
 Reverse osmosis
 Total Treat® continuous precipitation system

Services
 Design-build
 Membrane cleaning, replacement and chemicals
 Mobile water treatment
 Off-site regeneration of ion exchange resins
 RCRA disposal / recycling of concentrate baths and sludges
 Resin replacement, regeneration and cleaning
 Service deionization (SDI)
 System upgrades
 Treatability and pilot studies