Lancy™ Solids Separator

Lancy™ Solids Separator

The Lancy™ Solids Separator is a compact clarifier which uses inclined plates to remove suspended solids from wastewater.

Lancy™ Solids Separator

Solids enter the unit at 50-500 ppm and are typically reduced to 20-30 ppm in the corrugated plate interceptor (CPI) packs. The unit is designed to maintain a sludge blanket in the conical compartments under the CPI packs. The sludge blanket not only acts as a pre-filter but allows for a thicker sludge to be withdrawn from the clarifier. The Lancy™ Solids Separator is manufactured with carbon steel for the basins and FRP for the corrugated plate interceptor packs.

Available Standard Options

Coal tar epoxy or other resistant coatings
Rapid mix and flocculation chambers
Higher solids loadings

Features and Benefits

Up to 50% reduction in installation costs
Up to 80% less floor space requirements
No moving parts, less maintenance costs
Lower operation costs, gravity does all the work
Consistent performance
Factory tested
Integrates with other wastewater products

Print

Contact Us

Contact Us

Cassandra Matscherz

Administrative Assistant

724.772.1215

Request a Proposal

Product Documentation

Data Sheet
Lancy™ Solids Separator

Parts & Services

1.800.541.8610
iwsezservice.water@siemens.com

Related Equipment

Air Diaphragm Pump System
Chemical Reaction System
Chrome Reduction System
Concentrate Metering Pump
Cyanide Destruct System
Equalization Ssytem
Powder Carbon Make-up System
Powder Chemical Make-up System
Sludge Thickening System
Transfer Pump System